Putting a Fresh Coat of Paint on a Classic Car: How to keep it Looking Perfect
December 20th, 2009
If you are in the process of restoring a classic car and your next step is the paint job, it will be necessary for you to follow certain steps in order to make sure it not only looks fantastic, but stays fantastic long after the paint has dried.
For a finished product you can be proud of, choose a paint that is a combination of pure liquid and non-abrasive. This will help preserve the paint. In addition, choose a product that does not contain any wax or polish. Check to make sure that the product does not contain any abrasives. Furthermore, check to make sure the paint can be applied in a spray or a mist. In addition, stay away from any products that claim to be a cream or a paste; these products will not work for your car.
Next, before application, wash your car thoroughly with a grease cutting soap. Use clean, clear water and make sure you rinse quickly. Do not allow soapy water to dry on your car.
Use the softest towel possible to dry the vehicle, but make sure you check that towel link or other fibers are stuck to the surface of the car. Make sure the car is completely dry before you begin to apply the paint.
Begin to apply the paint, starting at the top of the car and working your way down. Cover each area of the car completely, but do not over saturate any area. The total time that it should take to paint the entire car is ten minutes.
Let the paint dry completely before attempting to move or dry.
|